Welcome To The PSI Blog

Kyle Pollard heads to Irwindale

by Kyle Tomita on Wed, Oct 5th, 2011 | John Reed Racing, Motorsports, Tuning

After Formula D round 6 in Las Vegas, Kyle Pollard's PSI Tomei 2.2L SR Nissan Silvia needed some preparation work before the long drive to Irwindale and the final FD round.  Pollard's Ikeya Formula transmission needed to be rebuilt.  The transmission came in and was installed on Tuesday, just a day before he was leaving to drive down.  A few other things were buttoned up and the car was almost ready for competition.  That night, John Reed began work on a wiring harness to connect the SR to a MoTeC M84.

Kyle Pollard S13 on dyno at PSI.jpg

The next morning John Reed installed the MoTeC and tuned it. This setup makes 544whp and 484 ft-lbs of torque. John did a great job getting the MoTeC installed and tuned quickly so Kyle can make it to Irwindale for the FD final round. Good luck Kyle.

PS: Kyle Pollard and his crew took the PSI trailer. So if you see a black trailer with PSI on the side, say hi, they are a good bunch of guys.